Plumbing issues are common in households and can range from minor annoyances to major disruptions. Understanding the most common plumbing problems and how to fix them can save you time, money, and frustration.

Here’s a guide to some of the most frequent plumbing issues and practical solutions to address them.

1. Dripping Faucets

Problem: A dripping faucet is one of the most common plumbing problems. The constant drip can waste significant water over time and increase your water bill.

Solution:

• Turn Off the Water Supply: Before you start, make sure to turn off the water supply to the faucet.
• Replace the Washer or Cartridge: A worn-out washer or cartridge is the most common cause of a dripping faucet. In compression faucets, replace the washer or the cartridge in other types of faucets.
• Reassemble and Test: Reassemble the faucet, turn the water supply back on, and check for leaks.

2. Slow Draining Sink

Problem: A slow-draining sink is often caused by a blockage restricting water flow. This blockage is commonly caused by a build-up of hair, soap, and other debris.

Solution:

• Use a Plunger: Start by dislodging the blockage with a plunger. Make sure to cover any overflow holes with a wet cloth to create a seal.
• Apply a Natural Drain Cleaner: Pour a baking soda and vinegar mixture down the drain. Let it sit for 15-30 minutes, then flush with hot water.
• Remove the Trap: If the sink is still slow, you may need to remove and clean the trap (the U-shaped pipe under the sink).

3. Running Toilet

Problem: A running toilet can waste a lot of water, usually caused by a faulty flapper, fill valve, or overflow tube.

Solution:

• Check the Flapper: Open the toilet tank and inspect the flapper. If it’s not sealing properly, replace it.
• Adjust the Fill Valve: Ensure the valve shuts off when the water reaches the correct level. If necessary, adjust or replace the fill valve.
• Inspect the Overflow Tube: Ensure the overflow tube isn’t cracked and is positioned correctly.

4. Low Water Pressure

Problem: Low water pressure can be due to various issues, including mineral build-up in pipes, leaks, or problems with the municipal water supply.

Solution:

• Clean Aerators and Showerheads: Mineral deposits can clog aerators and showerheads. Remove and soak them in vinegar overnight, then scrub with a brush.
• Check for Leaks: Inspect your plumbing for leaks. Even a small leak can significantly reduce water pressure.
• Contact the Water Company: If the issue persists, contact your water company to check for problems with the municipal supply.

5. Water Heater Issues

Problem: Common water heater problems include no hot water, inadequate hot water, and leaks. These issues can be caused by a faulty thermostat, sediment build-up, or a broken heating element.

Solution:

• Adjust the Thermostat: Ensure the thermostat is set to the appropriate temperature (usually around 120°F or 49°C).
• Flush the Tank: To address sediment build-up, flush the tank. Turn off the power supply, drain the tank, and refill it to remove sediment.
• Replace the Heating Element: If the water heater is still not working, the heating element might need to be replaced. This can be a more complex repair, so consider hiring a professional.

Resolve Common Plumbing Issues with Confidence: Call Our Team!

Common plumbing problems can often be resolved with some know-how and the right tools. However, if you encounter persistent or severe issues, it’s always best to consult with a professional plumber to ensure the problem is handled correctly and safely.

Reach out to Freeline Plumbing Services today at (301) 246-8398 to learn more.